65-69 Carburetors

65-69 Mustang Carburetors
Displaying 1 to 72 (of 72 products) Result Pages:  1 
 Product Name+   Price 
 

1961-66 Carburetor Linkage Kit - Ford FE V8 Tri-Power

1961-1966 - Carburetor Linkage Kit - Ford FE V8 Tri-Power.  Carburetor Linkage Kit for 1961-1966 Ford 390, 406 & 427 V8 with Tri-Power Induction. This kit includes the linkage required to actuate all 3 carburetors used on the famous Tri-Power induction package.
 
£179.40
 

1963-69 Carburetor Linkage Kit - 260/289/302 Tri-Power

1963-1969 - Carburetor Linkage Kit - 260/289/302 Tri-Power.  Carburetor Linkage Kit for 1963-1969 Ford 260, 289, or 302 V8 engine with Tri-Power induction. This kit includes the necessary linkage to actuate Ford's 3 X 2-bbl carburetor induction setup.
 
£179.40
 

1965 Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T

Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£707.85
 

1965 Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, M/T

Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, M/T.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£707.85
 

1965 Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, A/T

Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, A/T.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£1024.40
 

1965 Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, M/T

Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, M/T.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£1024.40
 

1965 Vacuum Advance Line - 6 Cyl.

Vacuum Advance Line - 6 Cyl.  Distributor Vacuum Advance Line for 1964-1/2-1965 Mustang with 170 or 200 6-cylinder. This is the steel line that runs between the vacuum advance and the carburetor. Correctly shaped and ready for installation. Fittings included.
 
£22.10
 

1965-66 Vacuum Advance Line - 260/289

Vacuum Advance Line - 260/289.  Distributor Vacuum Advance Line for 1964-1/2-1966 Mustang with 260 or 289 V8 engine. This is the steel line that runs between the vacuum advance and the carburetor. Correctly shaped and ready for installation. Fittings included.
 
£22.10
 

1965-67 Remanufactured Carburetor (Special Order Item) - 200 W/1 Barrel Carb, A/T

1965-1967 - Remanufactured Carburetor (Special Order Item) - 200 W/1 Barrel Carb, A/T.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£852.15
 

1965-67 Remanufactured Carburetor (Special Order Item) - 200 W/1 Barrel Carb, M/T

1965-1967 - Remanufactured Carburetor (Special Order Item) - 200 W/1 Barrel Carb, M/T.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£852.15
 

1965-68 Carburetor Rebuild Kit - 4100 Series Ford 4V

1965-1968 - Carburetor Rebuild Kit - 4100 Series Ford 4V.  Carburetor Rebuild Kit for 1965-1968 Ford 4100 Series V8 4-bbl Carburetor. For the do-it-yourselfer, we offer carburetor rebuild kits. These kits allow you to enhance and restore the performance of your existing carburetor. These kits offer a group of standard service items to rebuild your carburetor. Kits include assembly gaskets, diaphragms, & needle & seat. Components will vary from kit to kit based on application.
 
£65.65
 

1965-68 Carburetor Spacer - 6 Cyl.

1965-1968 - Carburetor Spacer - 6 Cyl.  Carburetor Spacer for With 6-Cylinder Engine. This spacer fits between the carburetor and the intake manifold, raising the carburetor and effectively increasing the intake manifold runner length.
 
£130.00
 

1965-68 Spring Kit, Secondary Diaphragm

1965-1968 - Spring Kit, Secondary Diaphragm.  Holley Replacement Secondary Diaphragm Spring Kit. Contains 7 color- coded springs for proper range and load depending on your vehicle and habits.
 
£31.20
 

1965-69 Carburetor Spacer - 4BBL

1965-1969 - Carburetor Spacer - 4BBL.  4-bbl Carburetor Spacer for 1965-1969 Ford 260, 289, 302, and 351W V8 engine. This spacer fits between the carburetor and the intake manifold, raising the carburetor and effectively increasing the intake manifold runner length. Measures 1" thick with a 1/2" vacuum port.

Includes:
-(1) Carburetor Spacer
-(1) Rubber Vacuum Port Plug
-(1) Spring Clamp for Rubber Plug
 
£93.60
 

1965-70 Carburetor Base & Spacer Plate Gasket - 4V V8

- Carburetor Base & Spacer Plate Gasket - 4V V8. 

Carburetor Base & Spacer Plate Gasket, Fits:
-1965-1967 289 HiPo
-1968 302 with 4-bbl
-1969 351 with 4-bbl
-1968-1970 (11/15/68 to 6/11/69) 428 4-bbl

Used as a carb-to-spacer & spacer-to-intake manifold gasket. Sold individually, please use (2) per vehicle.
 
£9.10
 

1965-70 Carburetor Rebuild Kit - 6 Cyl. W/Ford 1V

- Carburetor Rebuild Kit - 6 Cyl. W/Ford 1V.  Carburetor Rebuild Kit for 1965-1970 Ford 1100 Series 6 CYL 1v Carburetor. For the do-it-yourselfer, we offer carburetor rebuild kits. These kits allow you to enhance & restore the performance of your existing carburetor. These kits offer a group of standard service items to rebuild your carburetor. Kits include assembly gaskets, diaphragms, & needle & seat. Components will vary from kit to kit based on application

Applications:
1965-1970 170 and 200 6 CYL
1969-1970 250 6 CYL

*Kit works on all listed applications regardless of choke or transmission type.
 
£78.00
 

1965-70 Carburetor Rebuild Kit - 6 Cyl. W/Holley 1V

- Carburetor Rebuild Kit - 6 Cyl. W/Holley 1V.  Carburetor Rebuild Kit for 1965-1970 Holley 1940 Series 6-cyl 1V Carburetor. For the do-it-yourselfer, we offer carburetor rebuild kits. These kits allow you to enhance & restore the performance of your existing carburetor. These kits offer a group of standard service items to rebuild your carburetor. Kits include assembly gaskets, diaphragms, & needle & seat. Components will vary from kit to kit based on application

Applications:
1965-1970 170 and 200 6 CYL

*Kit works on all listed applications regardless of choke or transmission type.
 
£83.20
 

1965-72 Carburetor Base & Spacer Plate Gasket - 4V V8

1965-1972 - Carburetor Base & Spacer Plate Gasket - 4V V8.  Carburetor Base & Spacer Plate Gasket, Universal for 1958-1972 Ford V8 with Ford or Holley 4-BBL Carburetor. Used as a carb-to-spacer & spacer-to-intake manifold gasket. Sold individually, please use (2) per vehicle.
 
£5.20
 

1965-72 Carburetor Spacer Gasket - 2BBL Various

1965-1972 - Carburetor Spacer Gasket - 2BBL Various. 

Fel-Pro Carburetor Spacer Gasket for:
1965-1968 Ford 260/289 2-bbl
1968-1972 Ford 302 2-bbl
1969-1972 Ford 351W 2-bbl
1969-1971 Ford 429 2-bbl

This gasket goes between the carburetor and the carburetor spacer. Also is used between the intake manifold and the carburetor spacer. Sold individually, please use (2) per vehicle.
 
£5.20
 

1965-73 Carburetor - 4150 600 CFM 4V W/Manual Choke (Holley)

1965-1973 - Carburetor - 4150 600 CFM 4V W/Manual Choke (Holley).  Holley Carburetor Model 4150 4V 600 Cfm W/Manual. The famous Holley Double Pumper is an ideal choice for both street & strip applications. It has mechanical secondaries & dual accelerator pumps for additional fuel under hard acceleration & tremendous performance for lightweight vehicles w/manual transmissions or low gearing. It features dual fuel inlets, dual metering blocks to allow precise control of secondary jetting, a manual choke, power valve blow out protection, & it was 100% wet flow tested before it left the factory.
 
£925.60
 

1965-73 Carburetor - 4V W/Manual Choke 750 CFM (Holley)

1965-1973 - Carburetor - 4V W/Manual Choke 750 CFM (Holley).  Holley 750 CFM 4-barrel Carburetor with Manual Choke. This square bore carburetor is 100% wet-flow tested and calibrated. That means that it won't take you long to tune it and get out on the road again.

It has great features like:
-Center hung floats
-Unique chromate dip finish
-Double pumper
-Four-corner idle system
-Mechanical secondaries
-Manual choke
-Power valve blow-out protection
 
£1158.30
 

1965-73 Carburetor - 600 CFM 4V W/Electric Choke (Holley)

1965-73 Mustang - Carburetor - 600 CFM 4V W/Electric Choke (Holley).  Holley 600 CFM Square Bore 4-Barrel Universal Carburetor. 50-state emissions legal for 1965-1969 V8s. In California, car must have had a 4V carb originally. Gasket & instructions included. Cars with an automatic may need Linkage Return Spring Kit if not replacing an existing Holley.

Features:
-Shiny finish
-Vacuum Secondary
-Electric Choke
-Power Valve Blowout Protection
-Model 4160 w/ Side Hung Floats
-Single Feed Fuel Inlet
-Vacuum Ports: 2 Full Manifold; 1 Timed Vacuum
-"Next Gen" Needle & Seat design eliminates need for external float adjustment.
 
£789.10
 

1965-73 Carburetor - 600 CFM 4V W/Manual Choke (Holley)

1965-1973 - Carburetor - 600 CFM 4V W/Manual Choke (Holley).  Holley Model 4160 600cfm universal 4-barrel carb with side-hung floats. Holley 4160 carbs are calibrated for excellent street performance and the metering plate has no jets, power valves or accelerator pumps for easy tuning.

Features:
-Manual choke
-Vacuum secondaries
-100% wet-flow tested and calibrated
-Classic Gold-Chromate finish
 
£683.80
 

1965-73 Carburetor - 650 CFM 4V 4150 W/Manual Choke (Holley)

1965-1973 - Carburetor - 650 CFM 4V 4150 W/Manual Choke (Holley).  Holley Model 4150 Universal 4-bbl Carburetor, 650 CFM, with Manual Choke. Square bore style fits most Ford V8. Recommended for 350 cid & up (may vary based on your engine build). Proven double-pumper design features power valve blowout protection, dual fuel feeds, a 100% wet-flow test, mechanical secondaries with dual accelerator pumps & a classic dichromate finish.
 
£989.95
 

1965-73 Carburetor - 650 CFM 4V W/Electric Choke (Holley)

1965-1973 - Carburetor - 650 CFM 4V W/Electric Choke (Holley).  Holley Model 4150 Universal 4-bbl Carburetor, 650 CFM, with Electric Choke. street performance, traditional carburetor for the budget minded enthusiasts. It is 100% wet-flow tested & calibrated for street drivability right out of the box.
 
£790.40
 

1965-73 Carburetor - 750 CFM 4V W/Manual Choke (Holley)

1965-1973 - Carburetor - 750 CFM 4V W/Manual Choke (Holley).  Holley Model 4160 750 cfm Carburetor w/ center hung floats

Features the following:
-Universal calibration
-Manual choke
-Vacuum secondaries
-Power valve blow-out protection
-Ford A/T kickdown
-100% wet-flow tested and calibrated
-Classic Gold Chromate finish
 
£610.35
 

1965-73 Carburetor Calibration Kit - 1405 (Edelbrock)

1965-1973 - Carburetor Calibration Kit - 1405 (Edelbrock).  Edelbrock Carburetor Calibration Kit. Use this Edelbrock Performer Series Calibration Kit to "TUNE" your Edelbrock carb. The kit includes an assortment of metering rods, jets, retaining springs & a complete assortment of step-up springs. *REQUIRED for proper carburetor fine tunning due to climate, altitude, & your cars particular modifications.

Related Parts:
-Edelbrock's Performer 600 cfm Carburetor w/ Manual Choke
-Edelbrock's Performer 600 cfm Carburetor w/ Electric Choke
-Edelbrock's Performer 750 cfm Carburetor w/ Manual Choke
 
£130.00
 

1965-73 Carburetor Calibration Kit - 1405 (Edelbrock)

1965-1973 - Carburetor Calibration Kit - 1405 (Edelbrock).  Edelbrock Carburetor Calibration Kit. Use this Edelbrock Performer Series Calibration Kit to "TUNE" your Edelbrock carb. The kit includes an assortment of metering rods, jets, retaining springs & a complete assortment of step-up springs. *REQUIRED for proper carburetor fine tunning due to climate, altitude, & your cars particular modifications.

Related Parts:
-Edelbrock's Performer 600 cfm Carburetor w/ Manual Choke
-Edelbrock's Performer 600 cfm Carburetor w/ Electric Choke
-Edelbrock's Performer 750 cfm Carburetor w/ Manual Choke
 
£130.00
 

1965-73 Carburetor Calibration Kit - 1406 (Edelbrock)

1965-1973 - Carburetor Calibration Kit - 1406 (Edelbrock).  Edelbrock Carburetor Calibration Kit for Carburetor. Use this Edelbrock Performer Series Calibration Kit to customize your Edelbrock 600cfm carb. The kit includes an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs.

Related Parts:
-Edelbrock's Performer 600 cfm Carburetor with Manual choke
-Edelbrock's Performer 600 cfm Carburetor with Electric choke
-Edelbrock's Performer 750 cfm Carburetor with Manual choke
 
£89.70
 

1965-73 Carburetor Calibration Kit - 1407 (Edelbrock)

1965-1973 - Carburetor Calibration Kit - 1407 (Edelbrock).  Edelbrock Carburetor Calibration Kit for Carburetor. Use this Edelbrock Performer Series Calibration Kit to customize your Edelbrock 750cfm carb. The kit includes an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs.

Related Parts:
-Edelbrock's Performer 600 cfm Carburetor with Manual choke
-Edelbrock's Performer 600 cfm Carburetor with Electric choke
-Edelbrock's Performer 750 cfm Carburetor with Manual choke
 
£115.70
 

1965-73 Carburetor Jet Assortment Kit (Holley)

1965-1973 - Carburetor Jet Assortment Kit (Holley).  Holley Carburetor Jet Assortment Kit. The Holley jet assortment kit is the professional way to track/tune your Holley Carburetor for top performance. The kit includes a plastic case designed to keep jets separated & make them easily accessible. This kit consists of (2) each of (36) different jet sizes, ranging from #64 to #99, selected to give the broadest range of tuning & adjustment.

Fits the Following Holley Performance Gasoline Carburetor Models:
-2010
-2300
-4010
-4011
-4150
-4160
-4500
 
£135.85
 

1965-73 Carburetor Mounting Stud Kit - (5/16" X 1.70")

1965-1973 - Carburetor Mounting Stud Kit - (5/16" X 1.70").  ARP Carburetor 5/16" x 1.70" Mounting Stud Kit. The best way to make sure that carburetors stay perfectly sealed to the intake manifold is through the use of ARP s carb studs, which feature J-form threads to resist loosening from vibration. Made of 8740 chrome moly with a stainless steel finish. All carb stud kits come with aircraft-grade hex nuts and washers. ARP is the industry standard.
 
£55.25
 

1965-73 Carburetor Mounting Stud Kit - (5/16" X 2.70")

1965-1973 - Carburetor Mounting Stud Kit - (5/16" X 2.70").  ARP Carburetor 5/16" x 2.70" Mounting Stud Kit. The best way to make sure that carburetors stay perfectly sealed to the intake manifold is through the use of ARP s carb studs, which feature J-form threads to resist loosening from vibration. Made of 8740 chrome moly with a stainless steel finish. All carb stud kits come with aircraft-grade hex nuts and washers. ARP is the industry standard
 
£55.25
 

1965-73 Carburetor Rebuild Kit - 2100 Series V8 Ford 2V

1965-1973 - Carburetor Rebuild Kit - 2100 Series V8 Ford 2V.  Carburetor Rebuild Kit for 1965-1973 Ford 2100 Series V8 2-bbl Carburetor. For the do-it-yourselfer, we offer carburetor rebuild kits. These kits allow you to enhance and restore the performance of your existing carburetor. These kits offer a group of standard service items to rebuild your carburetor. Kits include assembly gaskets, diaphragms, stoppers, and needle & seat. Components will vary from kit to kit based on application.

Applications:
1965-1973 V8 with 2 barrel carburetor.

*Kit works on all listed applications regardless of choke or transmission type.
 
£51.54
 

1965-73 Carburetor Rebuild Kit - 600 CFM 4160 4V (Holley)

- Carburetor Rebuild Kit - 600 CFM 4160 4V (Holley).  Holley Carburetor Rebuild Kit for 600CFM 4160 Series 4-bbl Carburetor. Comes complete with all of the necessary gaskets, O-rings, pump diaphrams, needle and seats, power valves, & hardware for a a complete rebuild. This carburetor rebuild kit is for use on single inlet vacuum secondary Holley model 4160 carburetors. Although these were not used from the factory on, they often find their way onto a lot of automotive applications. The most common application for this kit is universal 600 CFM 4160 series 4-bbl carburetors.
 
£113.10
 

1965-73 Dash Pot - V8 2-BBL & V8 4-BBL

1965-1973 - Dash Pot - V8 2-BBL & V8 4-BBL.  Dash Pot for 1965-1967 V8 2-bbl and 1965-1973 V8 4-bbl engines. The dash pot helps to prevent stall-out during rapid deceleration by smoothly decreasing the amount of fuel that enters the carburetor.
 
£47.45
 

1965-73 Diaphragm, Vacuum Secondary Replacement

1965-1973 - Diaphragm, Vacuum Secondary Replacement.  Holley Secondary Diaphragm Replacement. For any Holley 4180 carb, made of rubber and cadmium plated metal. Comes with new screws.
 
£26.00
 

1965-73 Elbow Fuel Line - Holley 4V

1965-1973 - Elbow Fuel Line - Holley 4V.  Holley Fuel Bowl Banjo Elbow. These Holley fuel bowl banjo fittings are an exact fit to ensure a perfect seal. O-rings are included, so you'll have a perfect seal. Made of brass. W/ 9/16 -24 Thread x 5/16 Hose
 
£45.50
 

1965-73 Induction Package Dual Quad - 289/289 HIPO/302

1965-1973 - Induction Package Dual Quad - 289/289 HIPO/302.  Dual-Quad Induction Package for 1965-1973 Ford 289/289 HIPO/302. Get instant attention the next time you open your hood and let everyone see a double dose of 4-bbl carburetors. This induction package duplicates the one offered by Ford dealers in the 60's. It includes two Holley 4-bbl carburetors, fuel log, linkage, and complete tuning instructions. Gaskets are available separately.
 
£4213.95
 

1965-73 Performer 600 CFM Carburetor - Electric Choke (Edelbrock)

1965-1973 - Performer 600 CFM Carburetor - Electric Choke (Edelbrock).  Edelbrock Performer 600 CFM Carburetor with Electric Choke. No gaskets below the fuel bowl level to leak, & no plastic parts or power valves to blow out. Uses metering rods which are easily changed for tuning. Primary venturi booster is a bottom-feed design for better acceleration & drivability. Works well with 351 & smaller engines and Performer/Torker II intakes.
 
£610.35
 

1965-73 Performer 600 CFM Carburetor - Manual Choke (Edelbrock)

1965-1973 - Performer 600 CFM Carburetor - Manual Choke (Edelbrock).  Edelbrock's Performer 600 cfm Carburetor with Manual Choke. No gaskets below the fuel bowl level to leak, & no plastic parts or power valves to blow out. Uses metering rods which are easily changed for tuning. Primary venturi booster is a bottom-feed design for better acceleration & drivability. Height from the mounting surface to the air cleaner mounting surface is 3 3/8". Works well with 351 & smaller engines and Performer/Torker II intakes.
 
£610.35
 

1965-73 Performer 750 CFM Carburetor - Manual Choke (Edelbrock)

1965-1973 - Performer 750 CFM Carburetor - Manual Choke (Edelbrock).  Edelbrock's Performer 600 cfm Carburetor with Manual Choke. No gaskets below the fuel bowl level to leak, & no plastic parts or power valves to blow out. Uses metering rods which are easily changed for tuning. Primary venturi booster is a bottom-feed design for better acceleration & drivability. Works well with 351 & smaller engines and Performer/Torker II intakes.
 
£610.35
 

1965-73 Throttle Shaft Service Kit - W/Automatic Kick Down Lever

1965-1973 - Throttle Shaft Service Kit - W/Automatic Kick Down Lever.  Holley Throttle Shaft Service Kit With Ford Automatic Kickdown Lever. Throttle shaft service kit allows you to convert a Holley 4160 & 1850 series carb linkage to accept Ford automatic transmission kickdown lever. Includes a new throttle shaft, main body gasket, and mounting hardware to complete the installation.

*Fits Holley 4160 & 1850 Series Carburetors.
 
£55.25
 

1965-85 Carburetor Mounting Nut Set -/Cougar

1965-1985 - Carburetor Mounting Nut Set - Mustang/Cougar.  Carburetor Mouting Nuts, Set of 4 for 1965-1985 Mustang & 1967-1985 Cougar. For both 2bbl & 4bbl carburetors, these (4) nuts hold the carburetor firmly to the intake manifold.
 
£11.05
 

1966 Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T

Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£707.85
 

1966 Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T, With California Emissions

Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T, With California Emissions.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£707.85
 

1966 Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, A/T, Non-California Emissions

Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, A/T, Non-California Emissions.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£1024.40
 

1966 Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, A/T, With California Emissions

Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, A/T, With California Emissions.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£1024.40
 

1966 Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, M/T, Non-California Emissions

Remanufactured Carburetor (Special Order Item) - 289 W/4 Barrel Carb, M/T, Non-California Emissions.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£1024.40
 

1966-67 Remanufactured Carburetor (Special Order Item) - 200 W/1 Barrel Carb, A/T Or M/T, With California Emissions

1966-1967 - Remanufactured Carburetor (Special Order Item) - 200 W/1 Barrel Carb, A/T Or M/T, With California Emissions.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£927.55
 

1966-68 Vacuum Advance Line - 200

1966-1968 - Vacuum Advance Line - 200.  Distributor Vacuum Advance Line for with 200 6-cylinder. This is the steel line that runs between the vacuum advance and the carburetor. Correctly shaped and ready for installation. Fittings included.
 
£22.10
 

1966-73 Carburetor Rebuild Kit - 4300 Series Ford 4V

1966-1973 - Carburetor Rebuild Kit - 4300 Series Ford 4V.  Carburetor Rebuild Kit for 1967-1973 Ford 4300 Series 4-bbl carburetor. For the do-it-yourselfer, we offer carburetor rebuild kits. These kits allow you to enhance & restore the performance of your carburetor. Kit includes gaskets, diaphragms, & needle & seat. Components vary based on application.

Applications:
1967-1969 FE V8
1968-1973 302 & 351 V8; 428 & 429 V8
 
£40.30
 

1967 Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T, Non-California Emissions

1967 - Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T, Non-California Emissions.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£707.85
 

1967 Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T, With California Emissions

1967 - Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T, With California Emissions.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£707.85
 

1967 Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, M/T

1967 - Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, M/T.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£707.85
 

1967-69 Carburetor Rebuild Kit - 170 Ford W/Carter 1V

1967-1969 - Carburetor Rebuild Kit - 170 Ford W/Carter 1V.  Carburetor Rebuild Kit for 1967-1969 170 6-Cylinder Ford with Carter 1-barrel. Contains all the gaskets, o-rings & diaphragm needed to rebuild a YF code Carter 1-barrel. Rebuilding your carburetor ensures you keep that original in place and can help restore or improve both performance and fuel economy.
 
£47.06
 

1967-69 Carburetor Rebuild Kit - 390 W/Holley 4V

1967-1969 - Carburetor Rebuild Kit - 390 W/Holley 4V.  Carburetor Rebuild Kit for 1967-1969 Holley 4150 Series 4-bbl Carburetor. Includes all of the necessary gaskets, O-rings, pump diaphragm(s), needle & seat(s), power valve(s), & detailed instructions. This carburetor rebuild kit is for the following applications:

1967-1969 390 GT V8 engine
 
£82.55
 

1968 Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T, 50 State

1968 - Remanufactured Carburetor (Special Order Item) - 289 W/2 Barrel Carb, A/T, 50 State.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£707.85
 

1968-04 Plate Kit, Throttle Cable - 289/302 W/ AT

1968-2004 - Plate Kit, Throttle Cable - 289/302 W/ AT.  Edelbrock Throttle Cable Plate for 1968-2004 Ford 289/302 with Edelbrock carb and automatic transmission. Repositions stock throttle cable bracket to align with Edelbrock carb throttle arm. Use with Edelbrock Throttle Lever Adapter #EDL1483 and stock throttle cable bracket. Designed for Fords with cable activated throttle and automatic transmission kickdown rod. Comes in cadmium plated finish for long, corrosion-free life.
 
£38.35
 

1968-04 Plate Kit, Throttle Cable - 351W W/ AT (Except AOD)

1968-2004 - Plate Kit, Throttle Cable - 351W W/ AT (Except AOD).  Edelbrock Throttle Cable Plate for 1968-2004 Ford 351W with Edelbrock carb and automatic (Except AOD) transmission. Repositions stock throttle cable bracket to align with Edelbrock carb throttle arm. Use with Edelbrock Throttle Lever Adapter #EDL1483 and stock throttle cable bracket. Designed for Fords with cable activated throttle and automatic transmission kickdown rod. Comes in cadmium plated finish for long, corrosion-free life.
 
£35.92
 

1968-69 Carburetor Spacer - 390GT/428CJ/428PI

1968-1969 - Carburetor Spacer - 390GT/428CJ/428PI.  4-bbl Carburetor Spacer for 1968-1969 390 HiPo and 428 Cobra Jet. This black Bakalite spacer fits between the carburetor and the intake manifold. This raises the carburetor and effectively increases the intake manifold plenum volume, while forming a heat barrier between the manifold and the carb. Measures 1/4" thick.
 
£104.65
 

1968-69 Remanufactured Carburetor (Special Order Item) - 200 W/1 Barrel Carb, A/T Or M/T, With Large Venturi

1968-1969 - Remanufactured Carburetor (Special Order Item) - 200 W/1 Barrel Carb, A/T Or M/T, With Large Venturi.  Available for most 1960-79 Fords. These carburetors are not just rebuilt, they’re remanufactured! That means that they are re-engineered and updated to make your engine run smoother and cleaner, with improved performance and efficiency. Problem areas in the original design of each carb have been modified so they run better than the originals. Since each carb is special ordered for your exact application, and test run on an engine, installation is a simple bolt-on procedure. Our customers report significant and noticeable improvements in how their vehicles start, run and perform with just the addition of one of these carbs. The Finest Quality, Professionally Rebuilt Carburetors Available! • Each carb is test run and dialed in. • Eliminate cold start problems, hesitation and poor mileage. • Includes FREE Instructional video! These are NOT generic brand or generic fit carburetors. They are remanufactured Autolite or Motorcraft (depending on year and application), and are specific to year and application. NOTE: Customer must notify rebuilder directly concerning any warranty or repair service on rebuilt carburetors. Details are enclosed in carb packaging. Please call for applications/vehicles not listed.

Note: All carburetors are Special order items, no refunds. A cusomer service rep may contact you for your vehicle specifications.
 
£975.00
 

1968-77 Dash Pot - V8-2V & C8ZF-C, -D Carburetors

1968-1977 - Dash Pot - V8-2V & C8ZF-C, -D Carburetors.  Dash Pot for 1968-1977 Ford V8 2 barrel as well as C8ZF-C & -D Carburetors. The Dash Pot threads into the bracket attached to the intake manifold and helps to prevent stall-out during rapid deceleration by decreasing the amount of fuel that enters the carburetor.
 
£80.60
 

1968-95 Throttle Lever Adapter - W/Edelbrock Carb & AT

1968-1995 - Throttle Lever Adapter - W/Edelbrock Carb & AT.  Edelbrock Throttle Lever Adapter for 1968-1995 Ford with Edelbrock Carb and automatic transmission. This adapter is for Ford automatic transmission equipped vehicles (except A.O.D.) with cable operated throttle. It will reposition your factory cable to align with Edelbrock's carburetors. It is compatible with cruise control. Use with appropriate throttle cable plate (see below) when necessary. Available in cadmium plated finish for long, corrosion- free life.
 
£44.20
 

1969 Carburetor Spacer - 390

1969 - Carburetor Spacer - 390.  4-bbl Carburetor Spacer for 1969 390. This black Bakalite spacer fits between the carburetor and the intake manifold. This raises the carburetor and effectively increases the intake manifold plenum volume, while forming a heat barrier between the manifold and the carb. Measures 1/4" thick.
 
£73.45
 

1969-70 Carburetor Spacer - BOSS 302 4BBL

1969-1970 - Carburetor Spacer - BOSS 302 4BBL.  Carburetor Spacer for 1969-1970 Boss 302 4-bbl. This spacer fits between the carburetor and the intake manifold, raising the carburetor and effectively increasing the intake manifold runner length. Measures 1" thick with 9/16" O.D. vacuum port.
 
£104.65
 

1969-73 Kick Down Lever Extension - Ford AT W/Holley Carb

1969-1973 - Kick Down Lever Extension - Ford AT W/Holley Carb.  Holley Automatic Transmission Kickdown Lever Extension for 1969-& Cougar with Universal Holley 4-barrel Carburetor. Like the name implies, this part serves as an extension of the Ford kickdown lever so it has enough length to connect to the throttle arm on a Holley Universal carb. It is essential for proper operation of the kickdown function on an automatic equipped Ford using a Universal Holley 4-barrel. Includes extensions & c-clip. You'll also need the two Related Parts below for a proper install.
 
£13.00
 

1971-73 Carburetor Rebuild Kit - 4300 Series Ford 4V

- Carburetor Rebuild Kit - 4300 Series Ford 4V.  Carburetor Rebuild Kit for 1971-1973 Ford 4300 Series 4-bbl Carburetor. These kits allow you to enhance & restore the performance of your existing carburetor. These kits offer a comprehensive group of standard service items to rebuild your carburetor. Kits include assembly gaskets, diaphragms, & needle & seat. Components will vary from kit to kit based on application.
 
£44.81
 

1971-73 Distributor Vacuum Hose Kit - W/RAM Air

- Distributor Vacuum Hose Kit - W/RAM Air.  Distributor Vacuum Hose Kit for 1971-1973 with Ram-Air Hood. To maintain smooth engine performance and reliability, a new set of vacuum hoses will keep your Mustang running strong for years to come. Hoses are color-keyed as original for a proper show look. Includes routing schematic.
 
£35.10
 

1973 Carburetor Base Gasket - 351C

1973 - Carburetor Base Gasket - 351C.  Carburetor-to-Spacer Gasket for with 351C 4-bbl V8 Engine. This gasket seals the carburetor to the spacer.
 
£26.00
 

1973 Carburetor Spacer To Manifold Gasket - 351C

1973 - Carburetor Spacer To Manifold Gasket - 351C.  Carburetor Spacer-to-Manifod Gasket for 351C 4-bbl. This gasket seals the carburetor spacer to the intake manifold on models with spreadbore carburetor.
 
£16.25
 

1973 Diaphragm Carburetor Accelerator Pump - 351C 2BBL

1973 - Diaphragm Carburetor Accelerator Pump - 351C 2BBL.  Carburetor Accelerator Pump Diaphragm for and Cougar with 351C and 2-Barrel Carburetor. A damaged accelerator pump diaphragm can lead to drivability problems by not allowing the accelerator pump to work properly. If you are still running an old carburetor, it is a good idea to inspect the accelerator pump.
 
£18.20
Displaying 1 to 72 (of 72 products) Result Pages:  1