64-70 Mustang Roof Parts

Like any good car, a Mustang needs to have a solid roof that you can rely upon to keep you dry. Over the years, the roof will take a fair bit of a kicking and it can start to lose some of its original strength in support. When this occurs, it’s best to start looking for ways that you can replace the ailing parts, or give them some extra support.

Roof panelAt Essex Mustang Centre, we have a fine selection of roof parts for Mustang cars of all types and timelines. If you are worried about the roof parts of your car failing you in the near future, then we should have something to help you out.

Additionally, roofs can be used to carry out conversions of your vehicle. For example, you could convert from a Coupe style to a Fastback by changing the roof, and you’ll need some specific roof parts to get this done. We supply everything you might need to get the job done quickly and with minimal fuss, leaving you with a vehicle that’s safe and secure as well as capable of carrying extras like windshields, headliners or sun visors to maximize your driving experience.

Not all roof parts are changed because of their usefulness, though – you might just fancy a change! If you’ve become dissatisfied with the quality of your Mustang’ roof then you might want to consider making some changes with new roof parts.

They typically come already finished so they can be installed in a short period of time, and will usually be made from the same kind of material as the original. This can add years of life on to your vehicle, and make it far more desirable should you ever wish to sell it – a new roof can really revamp your Mustang.

The parts that make up your roof are equally as important, though. Roof drip rails are an area of the roof that tend to rust over quicker than the rest, for example, and this can call for a replacement part to make sure that your roof is as safe as possible. Many of these smaller roof additions will require welding, so make sure you have the knowledge – or know someone who does – to get the best possible finish.

Key Features

  • Designed to make switching your Mustang into a new style easier than ever before

  • Carefully mastered around the old-school designs, making sure that you have a roof that matches your vehicle and isn’t an obvious replacement

  • Keep your roof safe and with all of its features and additions intact with a massive selection of items to pick from

  • Minimize the amount and cost of repairs over the long-term with roof parts or a total replacement

The variety of styles of roof out there, as well as the various parts that go with your roof, mean that you can find it tough to choose what you need. If you need any help, don’t hesitate to contact us HERE for additional support. 

64-70 Mustang Roof Parts
Displaying 1 to 8 (of 8 products) Result Pages:  1 
 Product Name   Price 
 

1964-68 Front Roof Brace - Coupe/Fastback

This is a 1964-1968 Ford Mustang Front Roof Brace - Coupe/Fastback.

After many years on the road your 1964-68 Mustang may have lost some of its rigidity. This front roof brace will add support and integrity to your 1964-68 Mustang's roof and body.

If you are replacing the roof or converting from a Coupe to a Fastback then this part is highly recommend to complete the task.

  • Steel box section
  • Limits flexing of roof panel
  • Forms the support for windshield weatherstrip, headliner & sun visors
 

Additional Images

1964-68 Front Roof Brace
173.94
 

1965-66 Fastback Roof Panel

This is a 1965-1966 Ford Mustang Fastback Roof Panel. 

With prices of 1965-66 Mustang Fastbacks rocketing, don't cut corners when restoring yours.  If your roof panel is past its sell by date, rusted through in places or suffering from dimples & dents then look no further than our Fastback roof panel.

This skin is designed to be used with your original bracing.

  • Steel panel offering the same strength and integrity as the original
  • 1 piece panel for easy installation
  • Finished in black primer
 
694.20
 

1967-68 Fastback Metal Roof Drip Rail Replacement

This is a drip rail replacement for a 1967-1968 Ford Mustang Fastback.

One of the most common area's to rust on early Mustangs was the metal roof drip rail. Now you can replace yours with this metal reproduction.

These are the actual rails that the drip rail moldings attach to (available separately).

  • Sold in pairs
  • Requires welding
  • Quality reproduction
 

Additional Images

1967-68 Fastback Drip Rails
250.90
 

1967-68 Fastback Roof Panel

This is a 1967-1968 Ford Mustang Fastback Roof Panel. 

This steel replacement roof panel for your 1967-68 Mustang Fastback is the answer you've been looking for if your existing roof is rusty or dented.  It is a one piece skin designed to eliminate the need for countless repairs to your classic Mustangs roof and give you back the support and integrity you desire.

  • Finished in black primer
  • Reuse original bracing
  • Easy to fit
 
694.20
 

1967-68 Rear Roof Brace - Fastback

This is a 1967-1968 Ford Mustang Rear Roof Brace - Fastback.

An essential part of your 1967-68 Fastback's structure, this part may need replacing to improve your Mustang's integrity.

Also needed to complete a Coupe to Fastback conversion and when replacing the roof panel on your Fastback.

  • Supports the roof
  • Quality steel panel
  • Forms the support for the rear window weatherstrip, headliner & rear quarter trim
 

Additional Images

1967-68 Fastback Rear Roof Brace
191.10
 

1969-70 Fastback Roof Panel

This is a 1969-1970 Ford Mustang Fastback Roof Panel. 

If your 1969-70 Mustang roof is lacking in integrity and needs more support then this item will be an essential part of your restoration.

It is designed to be used as a skin, with your original bracing.

  • Same strength and integrity as original roof
  • Easy to fit
  • Finished in black primer
 

Additional Images

1969-70 Roof Panel
694.20
 

1969-70 Front Roof Brace - Fastback

This is a 1969-1970 Ford Mustang Front Roof Brace.

This necessary part of your 1969-70 Mustangs structure has been reproduced to fit like the original.  So if your roof is lacking a little integrity you'll certainly want to replace this part.

  • Gives support to windshield weatherstrip, sun visors & headliner.
  • Steel box section
  • Fits Fastback
 

Additional Images

1969-70 Front Roof Brace
178.10
 

1969-70 Rear Roof Brace - Fastback

This is a 1969-1970 Ford Mustang Rear Roof Brace - Fastback. 

Add integrity and support to your Mustang's roof and body with this replacement brace.

An essential part if replacing your Fastback roof panel or converting your Coupe to a Fastback.

  • Supports rear window weatherstrip & headliner.
  • Improves integrity
  • Quality part
 

Additional Images

1969-70 Rear Roof Brace
187.20
Displaying 1 to 8 (of 8 products) Result Pages:  1