64-73 Mustang Trunk Parts

Finding parts for the trunk of a Mustang can be hard work, and usually will leave you with a bit of chasing up to do when you want to get everything put into place properly. Rather than go through this irritating ordeal, though, why not consider making the replacement to the trunk parts that you need? At Essex Mustang Centre, we stock everything that you could possibly require if you want to get your vehicle back in a safe working order.

Trunk floorThe various trunk parts that you may need can make the job for difficult to work out, but it gives you far more flexibility in terms of what you will change and/or fix. For example, the rear bumper bracket pieces that we sell are incredibly useful for making sure that the vehicle stays secure and safe when mounting the rear bumper or you might need a new floor for the trunk entirely.

Whatever the problem is, you’ll need to come up with a solution to get it sorted, and we can help you do just that. With an array of useful skills and products waiting for you, we can help you make sure that your vehicle stays in tip-top shape for years to come.

For example, holes and damage to the trunk floor is a lot more common than you may have though – even for a Mustang with more than 40 years of road experience. To counter this problem and help you get a comfortable, easy to use vehicle we have various flooring that you can include to patch up the problems when they seem unfixable.

Additionally, our trunk parts go far beyond basic fittings and floors – we can give you access to just about anything that you might be needing for the trunk to ensure its safe, its installed properly and its legal. So, whatever you need, just give us a call and we can try and create something long-term for you. Our various packages and products available mean that you’ll get something for every part of your Mustang that you could possibly need, saving your lots of time and money in the process.

Key Features

  • Cut back on the cost of getting the trunk repaired by carrying out small, individual changes yourself instead of relying on others to do it for you

  • Give your vehicle more stability, more room and more assistance in getting things stored and prepared within the boot

  • Make sure that your vehicle is in the best condition possible for a sale

  • Convert your vehicle with the minimal fuss or input on your end

Looking for an easy way to improve your chances of keeping your Mustang on the roads for years to come? Then you need to look at our various Mustang trunk parts. Whether it’s a new lid, a floor or anything else in-between to help keep everything in place, we’ll have something that you can benefit from for many years to come. Contact us HERE if you need any assistance whatsoever! 

64-73 Mustang Trunk Parts
Displaying 1 to 19 (of 19 products) Result Pages:  1 
 Product Name   Price 
 

1964-66 Inner Trunk Bracket - LH

This is a 1964-1966 Ford Mustang Inner Trunk Bracket - Drivers Side

This bracket is spot welded to the trunk floor and supports the tail lamp panel.

The rear bumper bracket simply bolts to this piece when mounting the rear bumper (available separately).

  • Requires welding
  • Passenger side also available
  • Suitable for Coupe, Convertible & Fastback
 
31.85
 

1964-66 Inner Trunk Bracket - RH

This is a 1964-1966 Ford Mustang Inner Trunk Bracket - Passenger Side.

Whilst reinforcing the tail light panel this bracket also provides a mounting point for the rear bumper bracket.

Requires spot welding to the trunk floor.

  • Quality part
  • Easy to fit
  • Fits all models
 
31.85
 

1965-66 Complete Trunk Floor

This is a 1965-1966 Ford Mustang Complete Trunk Floor. 

If when you pop the trunk lid on your 1965-66 Mustang you are greeted by the sight of the floor beneath you in several areas then it's time to replace the trunk floor.  Use this complete assembly when there are just too many rust holes to patch up.

This trunk floor pan extends all the way from the tail lamp panel to the rear seat divider giving you a factory looking finish in which to mount your fuel tank.

Includes:
  • Trunk floor extensions
  • Trunk Inner Brackets
  • 2 rubber body plugs
 
825.50
 

1965-66 Deck / Trunk Lid - Coupe/Convertible

This is a 1965-1966 Ford Mustang Deck / Trunk Lid - Coupe/Convertible. 

This quality reproduction, stamped steel replacement trunk lid features all of the factory mounting points so it fits like a glove.  Years on the road may have left several of the panels on your 65-66 Mustang looking weathered or old. A new deck lid is a must when fully restoring your coupe or convertible.

  • Easy to fit
  • Hinges sold separately
  • Also known as luggage compartment door
 

Additional Images

1965-66 Deck Liid
299.00
 

1965-66 Deck / Trunk Lid - Coupe/Convertible GT/CS Fiberglass Trunk Lid With Spoiler

This is a 1965-1966 Ford Mustang Deck / Trunk Lid - Coupe/Convertible GT/CS Fiberglass Trunk Lid With Spoiler.

If your looking for something different and want your 65-66 Mustang to stand out from the crowd, this fiberglass trunk lid is a great place to start.  The '68 Shelby & California Special both featured this 3 piece deck lid complete with spoiler and end caps.  Give you vehicle this much sort after style using this replacement part.
  • Mounts using stock hinges and hardware
  • Fits Coupe & Convertible
  • As with all fiberglass, some prepping and fitting may be required
 
1,123.20
 

1965-66 Deck / Trunk Lid - Fastback

This is a 1965-1966 Ford Mustang Deck / Trunk Lid - Fastback. 

If the rear end of your Mustang looks like the back end of a bus it's time to replace your deck lid. Whether bent, buckled or rusted don't spoil the look of your valuable classic. Use this trunk lid to give her a desirable posterior!

  • Fits fastback only
  • Stamped steel
  • Features original mounting points
 

Additional Images

1965-66 Fastback Deck Lid
278.20
 

1965-66 Deck / Trunk Lid - Fiberglass - Shelby Style - Fastback

This is a 1965-1966 Ford Mustang Deck / Trunk Lid - Fiberglass - Shelby Style - Fastback.

Give your Mustang the WOW factor with this Shelby Style deck lid!  Dress your 65-66 Fastback as Carrol Shelby intended by adding this lightweight trunk lid complete with matching end caps.
  • Test fit recommended before prepping or painting
  • Utilizes stock hinges 
  • Quality part
 

Additional Images

1965-66 Deck Lid
1,047.80
 

1965-66 Rear Trunk Corner - LH - Coupe/Convertible

This is a 1965-1966 Ford Mustang Rear Trunk Corner - Drivers side.

A common rust area on all Mustangs because of the nature of its purpose. This stamped steel bracket replaces the corner of trunk rain gutter where the quarter panel and tail lamp panel meet.

  • Fits 1965-66 Coupe & Convertible
  • Passenger side also available
  • Requires welding
 

Additional Images

1965-66 Rear Trunk Corner
42.90
 

1965-66 Rear Trunk Corner - RH - Coupe/Convertible

This is a 1965-1966 Ford Mustang Rear Trunk Corner - Passenger side.

This area is prone to rust on all Mustangs and is normally rotten beyond repair. This stamped steel bracket welds to the quarter panel and tail light panel. It forms part of the trunk gutter.

  • Fits 1965-66 Coupe & Convertible
  • Driver side also available
  • Requires welding
 

Additional Images

1965-66 Rear Trunk Corner
42.90
 

1965-70 Convertible Trunk Brace End Caps

This is a pair of 1965-1970 Ford Mustang Convertible Trunk Brace End Caps. 

These pieces need to be replaced when changing your trunk floor rear cross member.

These pieces fix at either end of the rear floor cross member reinforcement, located above the trunk floor cross member.  These parts are available separately.

  • Sold as a pair
  • Fits 1965-70 Convertible
 
55.90
 

1965-70 Trunk Floor Panel Drop Off - RH

This is a 1965-1970 Ford Mustang Trunk Floor Panel Drop Off - Passenger side.

This is the part inside the trunk, next to the fuel tank, on top of the frame rail.

Whether completing a ground up restoration or simply making your Mustang road worthy the chances are that this panel will need replacing. In 95% of Mustangs this drop off panel is full of rust holes.

  • Fits Coupe, Convertible & Fastback
  • Dimensions: 33-11/16" L x 8-5/16" W
  • 1" trimming required for 1969-70 models.
 

Additional Images

1965-70 Trunk Panel
59.80
 

1965-70 Trunk Floor Panel Drop Off- LH

This is a 1965-1970 Ford Mustang Trunk Floor Panel Drop Off - Drivers side.

Whatever the year or model of your Mustang, the chances are that these trunk floor drop offs will need replacing.  This is one of the top 3 most common areas to find rust on your Coupe, Convertible or Fastback. 

This is the part located to the side of the fuel tank above the frame rail.

  • Quality reproduction
  • Measures 33-11/16" L x 8-5/16" W
  • Requires approximately 1" trimming for 1969-70 models.
 

Additional Images

1965-70 Trunk Panel
59.80
 

1967-68 Complete Trunk Floor

This is a 1967-68 Ford Mustang Complete Trunk Floor. 

This complete trunk floor eliminates the need to replace several different panels inside the trunk.  This panel allows you to complete your rebuild professionally and give your Mustang that factory finish.

This full trunk pan covers the area from the rear seat divider to the tail lamp panel.  The fuel tank is located in the centre of the floor (not included).

Includes:

  • 2 rubber body plugs
  • Trunk floor extensions
  • Trunk inner brackets
 
832.00
 

1967-68 Inner Trunk Bracket

This is a 1967-1968 Ford Mustang Inner Trunk Bracket. 

This bracket reinforces the tail light panel where the rear bumper attaches. It spot welds to trunk floor and rear cross member.

  • Fits Coupe, Convertible & Fastback
  • Fits driver or passenger side
  • Welding required
 
31.72
 

1967-68 Rear Trunk Corner - LH (Coupe/Convertible)

This is a 1967-1968 Ford Mustang Rear Trunk Corner - Drivers side.

This is a commonly corroded area of 1967-68 Mustangs. It is the upper rear corner of the trunk and forms the drip groove between the tail lamp panel and the quarter panel.

  • Fits Coupe & Convertible
  • Welding required
  • Passenger side sold separately
 
44.85
 

1967-68 Rear Trunk Corner - RH (Coupe/Convertible)

This is a 1967-1968 Ford Mustang Rear Trunk Corner - Passenger side.

This repair piece welds to the tail light panel and quarter panel to form the outer lip of the trunk opening.  Most Coupe or Convertibles have suffered some corrosion in this area.
  • Stamped steel
  • Welding required
  • Driver side also available
 
44.85
 

1969-70 Complete Trunk Floor

This is a 1969-70 Ford Mustang Complete Trunk Floor. - Convertible

When we say complete, we mean complete!  This trunk floor comes with the trunk floor extensions, inner brackets and even the rubber body plugs. So if you're Mustang trunk needs replacing this is definitely the way to go.

*Fuel tank sold separately

  • Extends from tail lamp panel to rear seat divider
  • Factory finish
  • Easy to fit
 
838.50
 

1969-70 Inner Trunk Bracket

This is a 1969-1970 Ford Mustang Inner Trunk Bracket. 

This inner trunk bracket bolts to your tail lamp panel and welds the to trunk floor thus keeping your tail light panel fixed securely.


  • Requires welding
  • Fits all models
  • Steel
 
31.72
 

1971-73 Full Trunk Floor Pan

This is a 1971-1973 Ford Mustang Full Trunk Floor Pan.

Just like the original this quality reproduction trunk floor has authentic ribbing and stamped impressions.

Covers trunk floor area of 54" x 38".

  • Fits all models
  • Requires use of trunk floor extension patches (available separately)
  • 1 piece floor
 
234.00
Displaying 1 to 19 (of 19 products) Result Pages:  1